|
|
 |
Diamond Blades (Dry High Speed) 4" - 18" |
|
|
|
|
|
|
|
 |
|
Tiger Tooth |
|
|
APB Tiger Tooth Blade
Our APB Tiger Tooth Blade cuts a combination of products:
Ductile Iron Pipe
Cast Iron
Rebar
Angle Iron
Threaded Rod
Plastic Pipe
Wood
Laser welded segments for durability
Oversized diamond grit
Exceptionally fast, smooth cutting of nearly all materials
Wear resistant swirled swides
Patented step segments
Designed for use on hand-held saws
Can be used wet or dry
1" arbor with 20mm bushing and drive pin hole standard
Available in 4", 4.5", 7", 8", 10", 12", 14", 16", 18" and 20" diameters |
|
|
|
|
|
 |
|
DXX General Purpose Blade |
|
|
DXX Dos Seggie Blade
Our DXX Dos Seggie Blade cuts a combination of products:
Concrete
Concrete Pipe
Ductile Iron Pipe
Cast Iron
Rebar
Angle Iron
Threaded Rod
Plastic Pipe
Wood
Asphalt
Prolonged cutting of abrasive materials will shorten the life span of the blade.
Laser welded segments for durability.
Oversized Diamond Grit
Exceptionally fast, smooth cutting of all materials
Unique dual cutting edge segments
Can be used on hand-held high speed saws.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", 16", 18" and 20" diameters. |
|
|
|
|
|
 |
|
General Purpose |
|
|
GPS General Purpose Blade
Our GPS General Purpose Blade cuts a combination of products:
Concrete
Asphalt
Block
Brick
Has "drop" segments for undercut protection.
Laser welded segments for durability.
Will cut approximately 4000 inch-feet of concrete or 5000 inch-fet of asphalt.
Can be used on hand-held high speed and low horsepower (18 H.P.) walk behind saws.
Can be used wet or dry.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", 16", 18" and 20" diameters.
|
|
|
|
|
|
 |
|
Pipe Piranha |
|
|
EPB Ductile Iron Blade
Our EPB Ductile Iron Blade cuts a combination of products:
Ductile Iron Pipe
Plastic Pipe
Concrete
Safer, faster and more economical than using abrasive wheels.
Laser welded segments for durability.
Electroplated diamond center core allows for beveling of pipe.
Can be used on hand-held high speed and low horsepower (18 H.P.) walk behind saws.
Can be used wet or dry.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", 16", 18" and 20" diameters.
|
|
|
|
|
|
|
|
 |
|
Asphalt/Green Concrete |
|
|
DAS Asphalt Blade
Our DAS Asphalt Blade cuts a combination of products:
Asphalt
Asphalt over concrete
Green Concrete
Laser welded segments for durability.
Can be used on hand-held high speed and low horsepower (18 H.P.) walk behind saws.
Can be used wet or dry.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", 16", 18" and 20" diameters.
|
|
|
|
|
|
 |
|
Cured Concrete |
|
|
STA Concrete Blade
Our STA Concrete Blade cuts a combination of products:
Concrete Pipe
Cured Concrete
Block
Brick
Laser welded segments for durability.
Can be used on hand-held high speed and low horsepower (18 H.P.) walk behind saws.
Can be used wet or dry.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", 16", 18" and 20" diameters.
|
|
|
|
|
|
 |
|
Poly-Gator High Density Polyethylene Blades |
|
|
Poly-Gator High Density Polyethylene Blade
Our Poly-Gator High Density Polyethylene Blade cuts a combination of products:
Sheet Metal (3/16" max)
All flat roofing materials Wood & Metal studding Earth & Roots Particle & Pressed Board Wood Developed for cutting and ripping through a wide variety of difficult to cut materials
Cuts HDPE and polyethylene pipe with no melting or burning
Reversible for a longer blade life
Cuts dry with no lubricant needed
Laser welded segments for durability.
Can be used on hand-held high speed saws.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", 16", 18" and 20" diameters. |
|
|
|
|
|
 |
|
PVC Pipe |
|
|
PVC Pipe Blade
Our PVC Pipe Blade cuts a combination of products:
Cuts PVC "forever"
Cuts twice as fast as an abrasive wheel
Has electroplated "side burns" for bevelling the end of a pipe
Laser welded segments for durability.
Can be used on hand-held high speed saws.
1" arbor with 20mm bushing and drive pin hole standard.
Available in 12", 14", and 16" |
|
|
|
|
|
|
|
|
