JS-131 Gas Walk Behind | Joint Clean-out Saw

Name: JS-131 Gas Walk Behind | Joint Clean-out Saw
SKU: SX77131
Availability: InStock

$4,774.25

The JS-131 is a Joint Clean-out Saw/Mill designed to clean-out existing control joints to prepare for new joint fill application or remove failing or deteriorated existing joint fill material. This machine can be used to remove polyurea, epoxy, and polyurethane joint fill materials. The JS-131 can utilize a variety of blade thicknesses, common sizes include, .095, .125, .187, .250, .375, .500 in width. The JS-131 can also be used with a 1.5″ stack of blades for milling projects.

- + Add to Cart

10" x .095" x 1" Tiger Tooth Blade

$161.10

- + Add to Cart

Ultra Vac 1250-G | Gas Powered Vacuum

$7724.00

- + Add to Cart

JS-131 Gas Walk Behind Joint Clean-out Saw

Part Number: SX77131

The JS-131 Gas – Joint Clean-out Saw is a gas-powered walk-behind saw used for joint clean-out, concrete sawing, and trench cutting. The material is milled out of the joint in an upward direction and is collected by the debris collection port. It features a blade guard design with up-cut rotation, which permits easy dust extraction and a secure connection to the dust collection system. A dust collector with a minimum of 350 CFM is recommended for use with this machine for open joint cleanout. A 225 CFM is acceptable with certain blade and jobsite configurations, but production speed is significantly dependent upon job site conditions.

The JS-131 joint clean-out saw uses dry diamond blades and cuts to a maximum depth of 3″. It features a secure screw-down depth control for added precision and safety power source: 11.7 HP Honda gas engine.

Weight: 200 lbs
Power Source:
Honda GX390, 11.7 HP
Fuel Type:
Gasoline
RPM:
5,850
Max Depth of Cut:
3"
Blade Width:
.095", .110", .125", .187", .250", .375", .500"
Max Blade Width:
Single Blade: .500" Multiple Blades: 1.5"
Blade Diameter:
8", 10"
Blade Arbor Size:
1" with Drive Pin Hole
Dust Collector Size:
350+ cfm

Gas walk-behind mill used for joint clean-out, concrete sawing, and trench cutting
Up cut blade rotation with vacuum port on the front of the blade guard allows for easy and efficient dust collection
This machine is designed to mill out dirt and debris from existing control joints prior to filling, or to remove existing joint fill material in need of replacement
A dust collector with a minimum of 350 CFM is recommended for use with this machine when cleaning out open control joints. (Joint fill removal or concrete cutting may be acceptable with 225 CFM)
Production speed is greatly dependent upon job site conditions
Made in the U.S.A.

JS-131 Joint Saw Gas Spec Sheet

JS Series JS-130 – 131 Owners Manual

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

JS-131 Gas Walk Behind | Joint Clean-out Saw

Reviews

STAY SHARP!