Search Site
 

Grid  List 

Page:
  1. 1
  2. 2
  1. New and improved Mark III Joint Cleanout/Decorative Cutting machine. The third generation of the popular “Dust Buggy” is designed to clean out joints and remove existing joint filler faster and more accurately. * A specially designed blade guard allows the operator to see the blade yet still covers 98% of it for exceptional dust control. * The new control handle is adjustable and rotates to get closer to walls or racks. * The aluminum alloy chassis is extremely durable. * Cuts up to 2" Deep. Fully adjustable and locking depth control for consistent depth. * Uses 7" or 8" blades with 7/8 arbor. * Wide polyurethane wheels provide a stable platform for accuracy. * Built in weights in the front of the machine increase stability. * Fully Complies with ANSI diamond blade speed regulations. * Production rates vary but a good operator can easily clean out 10,000 lineal feet of new, unfilled joints in an 8 hour shift. MADE IN USA 25 Year Warranty on Chassis. * See our Documents section below for information regarding OSHA Silica Dust Compliance

    Learn More
  2. SX13590

    Heavy Duty Dust Buggy - Joint Cleanout Mill Portable, heavy duty joint cleanout mill perfect for indoor joint work. Its up-cut rotation allows debris to be removed from joints as your moving forward. Designed to clean out existing control joints before filling, or to remove failing or deteriorated epoxy, polyurea, or polyurethane joint fillers. * Mills/cleans up to 2 inches deep and up to 3/8" in width. * Extremely durable heat treated, aluminum alloy chassis. * Wheel mounts are CNC machined for stability and accuracy when operating. * Fully adjustable blade depth control. * Extended control handle gives operator optimal control and accuracy. * Powered by a Metabo 24-230, 6,600 RPM, 115V, 15 Amp Grinder * Proudly Made in U.S.A.


    Learn More
  3. $1,395.00

    SX13550 Electric Dust Buggy - Joint Cleanout Mill Portable, joint cleanout mill perfect for indoor joint work. * Up-cut rotation allows debris to be removed from joints as your moving forward. * Designed to clean out existing control joints before filling, or to remove failing or deteriorated epoxy, polyurea, or polyurethane joint fillers. * Cleans up to 2 inches deep and up to 3/8" in width. * Fully adjustable blade depth control. * Extended control handle gives operator optimal control and accuracy * Durable steel chassis. * Powered by a Metabo 24-230, 6,600 RPM, 115V, 15 Amp Grinder * Proudly Made in U.S.A.

    Learn More
  4. SX77100E JS-100E - 10HP Electric Joint Repair Milling Machine The JS-100E is a 10 HP, three phase electric (available in 208 or 480) joint milling machine designed to clean out joints or, remove old joint filler and mill out spalled joints up to 4" wide. Ideal for heavy industrial projects where gas or propane machines can not be used. Two blade guards for two different tasks. Right side is designed for a single blade up to .500 wide and up to 12" diameter. Works with US Saws 8", 10" and 12" blades with 1" Arbor and Drive Pin hole. Left side is a 4" wide set of spacer flanges to stack or space numerous blades for spalled joint repair. Learn More
  5. SX70000K Cut-Vac Assembly With Metabo, 15 Amp, 8,500 RPM Grinder With Crack-Vac Dolly The Cut-Vac and dolly was originally a "SAWTEC" product and has been in production for over 20 years. A favorite among decorative concrete contractors as well as coating contractors for cutting termination cuts or honoring existing joints in floor coatings. It's lightweight and compact design allows the operator to have the feeling of a handheld machine in a standing position. Features a metal blade guard for safety. The polycarbonate dust collection shroud is highly abrasion resistant to hold up to abrasive concrete dust and has a 5 year warranty. This unit comes complete with a Metabo 24-180 8,500 RPM grinder Max cutting depth 1-1/8" Use 7" or 8" Blades in widths .090, .095, .110, .125, .187, .250., .375. Learn More
  6. SX90102 CC100 Crack Chaser with 9HP Honda Engine The CC-100 is the most productive and accurate crack chaser on the market. It's unique wheel system allows the operator to maneuver the machine easier and make tighter turns to increase production and cut down on wasted crack repair materials. Learn More
  7. SX77130 JS-130 13HP Honda Gas Walk-Behind Joint Cleanout Mill. This machine is designed to mill out dirt and debris from existing control joints prior to filling, or to remove existing joint fill material in need of replacement. The material is milled out of the joint in an upward direction and is collected by the debris collection port. A dust collector with a minimum of 350 CFM is recommended for use with this machine. Production speed is greatly dependant upon jobsite conditions. Please call for more info. Learn More
  8. SX70000 Cut-Vac Assembly with 15 Amp 8,500 RPM Grinder (Requires Auxiliary Dust Collection System) Learn More
  9. Special Price $430.00

    Regular Price: $450.00

    SX55014 5" Crack chaser Assembly with Metabo 8 Amp Electric Grinder US Saws 5" Crack Chaser is a handheld saw designed for routing out random cracks or cutting concrete while collecting the dust. Powered by a Metabo 9-115 8.5 amp 10,500 RPM grinder which is good for light duty occasional use. Metal blade guard for safety Polycarbonate dust collection shroud is extremely abrasion resistant to hold up to abrasive concrete dust and had a 5 year warranty Meets OSHA dust collection requirements when used with approved dust collector Compatible with 4", 4.5" and 5" Blades including "V" blades Learn More
  10. SX55010 5" Crack chaser Assembly with Metabo 15-125 13.5 Amp Grinder US Saws 5" Crack Chaser is a handheld saw designed for routing out random cracks or cutting concrete while collecting the dust. Powered by a Metabo 15-125 13.5 amp 2,800-9,600 RPM grinder which is good for heavy duty continual use. Metal blade guard for safety Polycarbonate dust collection shroud is extremely abrasion resistant to hold up to abrasive concrete dust and had a 5 year warranty Meets OSHA dust collection requirements when used with approved dust collector Compatible with 4", 4.5" and 5" Blades including "V" blades Learn More
  11. SX13402 Scoring Saw, Premium Tuc-Pointer Assy w/Metabo W8-115 8 amp Grinder Learn More
  12. SX13401 Scoring Saw, Premium Tuc-Pointer Assy w/Metabo 14-125 Plus 12 Amp Variable Speed Grinder Learn More

Grid  List 

Page:
  1. 1
  2. 2

Contact Us

Joint Mills & Crack Saws