Ultra Vac 1250-G | Gas Powered Vacuum
Ultra Vac 1250 - Gas Dust Collector
Part Number: SX50005G
The U.S.SAWS Ultra-Vac 1250-G is a heavy duty vacuum designed for collecting concrete dust where a gas powered engine is most convenient. The 1250-G is the preferred vacuum system for the JS-131 & JS-160P Joint Cleanout Saw, the CC-100 Crack Chaser and a variety of Early Entry Saws. The wide, flat wheels make it a good choice for early entry control joint cutting as they will lessen the possibility of indentations in the slab. This machine is constructed of an all steel tube frame with a polyethylene body for years of use and abuse. Powered by a reliable Honda GX240. This vac comes with a 25’ 3” hose. The large 12 pleat polyfelt filter allows continued airflow even when the 12.5 gallon dust bin is near capacity. External HEPA filters and Longopac bagging systems are available options. Complies with OSHA Table 1 regulations.
U.S.SAWS Ultra Vac 1250 - GAS Powered Vacuum
The U.S.Saws Ultra-Vac 1250-G is a heavy duty vacuum designed for collecting concrete dust where a gas powered engine is most convenient. The 1250-G is the preferred vacuum system for the JS-130 & JS-160P Joint Cleanout Saw, the CC-100 Crack Chaser and a variety of Early Entry Saws. The wide, flat wheels make it a good choice for early entry control joint cutting as they will lessen the possibility of indentations in the slab. This machine is constructed of an all steel tube frame with a polyethylene body for years of use and abuse. Powered by a reliable Honda GX240. This vac comes with a 25’ 3” hose. The large 12 pleat polyfelt filter allows continued airflow even when the 12.5 gallon dust bin is near capacity. External HEPA filters and Longopac bagging systems are available options. Complies with OSHA Table 1 regulations.
| Coming Soon |
- CFM: 450
- Water Lift: 115"
- Dust Bin Capacity: 12.5 Gallon (About 50-60 lbs)
- Fuel: Gasoline
- Hose Size: 3" diameter
- Engine: Honda GX240 8hp.
- Equipped with a Honda GX240 gas engine and a high CFM Airtec blower for use with our bigger saws that require more air flow
- Used With Joint Cleanout Saws, Crack Chasers, Early Entry Saws, Scarifiers, Line Stripe Removers
- Equipped with front & rear handles for easy transportation
- 25 Ft 3" Diameter hose included
- Longopac bagging system is available
- HEPA Filters are available
- Manual Filter Clearing Mechanism (As required by OSHA guidelines)
- Tube Steel Frame
- Polyethylene Body
